 |
Buildbase is one of the largest builders
merchants in the UK, giving you access to 100 branches from Scotland
to Portsmouth.
All with comprehensive stocks sourced from nationally renowned suppliers:
|
 |
|
|
Drywall
High
Thread Screws** |
ranging
from 32mm
to 76mm |
|
|
|
 |
Resilient
Bar |
3000mm |
|
|
|
 |
Plasterboard |
Echeck
dBcheck
Firecheck |
** For fixing to Resilient
Bar |
|
Lafarge Direct to Timber
provides a fast and effective means of creating ceilings.
It is the method for attaching plasterboard to the underside of timber
floor joists and roof trusses.
- Quick and simple to install
- When taped and jointed it provides a smooth finish for direct
decoration
- Can be given a textured finish
- Provides fire resistance and sound insulation where required
|
 |
|
- Rafters: 50 x 100mm at 600mm
centres with noggings
- Insulation: 75mm glass mineral wool
quilt density 10.5kg/m3
- Ceiling: 60mm Lafarge Thermalcheck
K insulating wallboard
|
|
 |
 |
- Joists: 50 x 150mm at 600mm
centres with noggings
- Insulation: 60mm glass mineral wool
quilt density 10.5kg/m3
- Ceiling: 50mm Lafarge Thermalcheck
K insulating wallboard
|
|
| |
 |
|
|
Resilient
Bar |
3000mm |
|
|
|
 |
Acoustic
Floor Clip |
30
40
50
65 |
|
|
|
 |
Metal
Angle |
3600mm |
|
|
|
 |
Resilient
Tape |
50 x
1200mm |
|
|
|
 |
Acoustic
Floor
Screws |
63mm |
|
|
|
 |
Intumescent
Acoustic
Sealant |
0.9
0.38 |
|
|
|
 |
Lafarge
Firecheck
or dBcheck
Wallboard |
various |
|
Lafarge Cormet™ Acoustic Floor is
designed as a separating
floor between and within dwellings and can be used with Lafarge Wall
Lining and partition systems. The system is
intended for conversion and improvement work eg. converting houses into
flats.
- Conversion and improvement work
- Particularly for remedial treatment of existing floors
|
 |
 |
- Floor: Cormet Acoustic Floor system using 18mm plywood/tongue
and groove chipboard or oriented strand board with salvaged,
re-used or new 22mm square edge softwood floorboards laid
on top if required. Insert an additional layer of 15mm Lafarge
Firecheck wallboard inside the cavity to form a bridge and
to protect sides of joist
- Joists: 50 x 200mm at 450mm centres
- Insulation: 100mm glass mineral wool
density 10.5kg/m3
- Ceiling: existing lath and plaster
|
|
| |
 |
Cormet Partitions are suitable for domestic and general
commercial use. They are strong high performance systems which are:
- Cost effective
- Versatile
- Lightweight
- Able to achieve high levels of fire resistance, acoustic and thermal
insulation
|
 |
 |
- Studs: 50mm width at 600mm centres
- Facings: one layer 12.5mm Lafarge dBcheck wallboard both
sides
- Insulation: 25mm glass mineral wool density 19.5kg/m3
- Acoustic rating: Rw 44 dB
|
|
| For further technical advice contact Enquiryline
on 01275 377789 |
| |
